Is Sealer and Glaze Abrasive at all ?

[MrSpeed]

I had to use a pretty agressive product to try to remove swirls. I got many of them but I want to know if I need an intermediate product like SCRATCH REMOVER or can I just go straight to Sealer and Glaze ?

In my little test spost the Sealer and Glaze did not quite get the finish to where I wanted it si I'm not sure if I didn't work the sealer/glaze long enough (if it has some polish abrasives) or if I need to go back with a "finer" polish like SCratch Remover.

I do not have a PC, just a cheapy craftsman 9" random orbiter.

Thanks,
Rich

[Dennis H.]

I'd try the Scratch Remover with the random orbital. Use a foam applicator and work the product in a little longer than you think. Work in an area that is manageable in size 2 to 3 square feet. When you're done use the Sealer and Glaze then the Natural Formula wax. You should see a dramatic difference.