Results 1 to 5 of 5
  1. #1
    Webb's Avatar
    Join Date
    May 2003
    Location
    Massachusetts
    Posts
    191
    Post Thanks / Like

    PC speed/pad on different products question

    for...

    MPPC

    Show Car Glaze

    M-26 Yellow Wax

    On my first time using MPPC I kept my PC on 3.5-4.0 was that a good speed for it ?

    Show car glaze was applied by hand,but next time I want to try with a PC,which pad/speed would you guys recomend ?

    M-26 or any kind of wax I prefer by hand.

    Thanks

  2. #2
    groebuck's Avatar
    Join Date
    Sep 2003
    Location
    Cleveland, oHIo
    Posts
    2,494
    Post Thanks / Like
    Show Car Glaze has no cleaning or abrasives so you can use the soft buff pad (one you would use to apply a wax or sealant)...
    You have activated my special ability....

  3. #3
    overtheedge's Avatar
    Join Date
    May 2004
    Location
    Mississippi
    Posts
    80
    Post Thanks / Like
    For any type of polishing where you are using some type of deminishing abrasive polish or paint cleaner, I would recommend either a cutting or polishing pad with a speed setting of 4.5-5. For glazes and waxes I would recommend using a finishing pad on a setting of 2.5-3.
    "I am ready to meet my Maker. Whether my Maker is prepared for the great ordeal of meeting me is another matter." - Sir Winston Churchill

  4. #4
    Webb's Avatar
    Join Date
    May 2003
    Location
    Massachusetts
    Posts
    191
    Post Thanks / Like
    Anyone else ?

    Thanks

  5. #5
    Boss_429
    Guest
    I pretty much agree with overtheedge...................

    For the MPPC, I would spread the product over the area you are working at a speed of 3 using a polishing pad, and then turn it up to 5 to work it, and then quickly remove the product with an MF.

    For the #7, I would apply using a finishing pad at a speed of around 3.

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Which pad/speed for these products?
    By geoffbcvt in forum Car Detailing
    Replies: 3
    Last Post: 03-19-2014, 11:41 AM
  2. HD speed question
    By dogma in forum 3D / High Definition Car Care
    Replies: 9
    Last Post: 06-04-2012, 09:49 PM
  3. What PC speed for various PB products?
    By imported_Faceman in forum Machine Polishing & Sanding
    Replies: 4
    Last Post: 01-07-2005, 07:37 PM
  4. PC speed for products...
    By Scotty in forum Car Detailing
    Replies: 12
    Last Post: 05-14-2004, 07:53 PM
  5. PC Speed Question
    By gb387 in forum Car Detailing
    Replies: 5
    Last Post: 02-08-2004, 10:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •