P21s

[mac5725]

Used P21S for the first time with my Porter Cable. Product was effertless compared to Groits Best in Show liquid, which is what I`ve used as a carnuba topper. Went very quick and required only 2 pollishing bonnets vs. the 6+ that Groits would have required. I did however find the P21S to be quite hard. I really had to work at spreading the product on my pad with a picnic knife. I don`t see doing 25 cars with a container. Seems more like 10-15. I`d appreciate everyones comments. Thanks. Mark

[Gary Jones]

I only apply the P21S with a foam pad, by hand. I have never used the PC for the finishing wax, but have a friend that does. He applies the wax to a foam pad on the PC with a small foam pad and not a knife. Not sure how this would work with a terrycloth bonnet, but you might give it a try. A little P21S goes a long way.

Gary

P.S. Welcome to DC

[SpoiledMan]

I did two coats by hand on my Honda van and I cant even tell that any product is missing from the can. I`m going to have this stuff a long time.

[CharlesW]

S100 (P21S?)goes a long way for me.
I also use a foam hand applicator and I think 40 to 50 vehicles would be a very strong possibility from one jar.
More is not neccesarily better. If you can tell where you have applied it, that will be plenty.

Charles