SSR2 Question...

[Shaun]

I have a small harline scratch that you can`t even feel with your fingernail. How long should I work SSR2 over it? Like is there such thing as working it TOO long? I have a PC and Megs pads. What color pad would you recommend aswell?

[groebuck]

use the yellow polishing pad and work it until it is dry and almost gone, then wipe off the remaining residue with a mf towel - pc should be set @ 5-5.5

[Shaun]

...and what if it is not gone? (should be tho)

[Big Leegr]

If you`ve used SSR2 before, you probably wouldn`t worry about it not coming out if it`s that light. It really works!
MY FIRST EXPERIENCE WITH IT:
I just got it and tried it on my winter swirled car (black, of course). I went with a white pad on the PC and it got rid of pretty much all swirls/scratches that weren`t to the metal! And with only one pass! (well, a few passes, one application).
Later, when I was cleaning up, I realized I had used an Edge pad.
"So what?" you may ask.
So....Edge white pads are their "ultra fine finishing" pad! Not even a polishing pad!
Therefore, if SSR2 works this well with a finishing pad, imagine what a polishing pad can do!

[Bob]

I would even try the ssr using a white pad myself. Start with SSR1 if you got it though, that could even do the trick.