Results 1 to 12 of 12

Thread: spotters???

  1. #1
    The mullet has struck again! I be banned!!
    Join Date
    Mar 2004
    Location
    tampa, fl
    Posts
    20
    Post Thanks / Like

    spotters???

    what do you guys know about these spotterslike the powr-flite ps25, george gve, mytee s300, or durrmaid s2-200? they`re not extractors, but they are lightweight, small, give anywhere from85-100" of lift, pump from 38-85 p.s.i., and run around $400. These would fit in my trailer and my budget, but if they don`t perform, I wont bother. I will stick to the old scrub method if they suck.(well, in this case if they don`t suck?????)
    rob
    dirt doctors

  2. #2
    Detailing expert
    Join Date
    Feb 2004
    Location
    Va. Beach, Virginia
    Posts
    52
    Post Thanks / Like
    Dude I would suggest you invest in a heated extractor. I recommend the mytee 6 gallon heated extractor(spyder). It`s a great machine.
    "If I can`t make it shine, it doesn`t shine." Gallop`s detailing waxes all competion."

  3. #3
    The mullet has struck again! I be banned!!
    Join Date
    Mar 2004
    Location
    tampa, fl
    Posts
    20
    Post Thanks / Like
    good call .... i looke dat that one but dont have the room or duckets for it...thanks for the suggestion, my man.
    dd

  4. #4

    Join Date
    Oct 2002
    Posts
    4,536
    Post Thanks / Like
    I would stay away from the Mytee brand unless a Mytee dealer is located close by because if not it will cost you major money to be repaired.

    The $400 units can be very effective at cleaning even without hot water.

    Pictures are worth a thousand words so here are two.

    Anthony
    Attached Images Attached Images
    "The Art & Science of Auto Detail"

  5. #5

    Join Date
    Oct 2002
    Posts
    4,536
    Post Thanks / Like
    AFTER: I used the Stryker cold water spotter. Hot water canbe added if needed.
    Attached Images Attached Images
    "The Art & Science of Auto Detail"

  6. #6
    The mullet has struck again! I be banned!!
    Join Date
    Mar 2004
    Location
    tampa, fl
    Posts
    20
    Post Thanks / Like
    nice outcome.

  7. #7
    MobileFanatics's Avatar
    Join Date
    Mar 2004
    Location
    Texas
    Posts
    10
    Post Thanks / Like
    What do you think about this little spotter? So far it`s the only one I found with the highest lift with heat. Thanks. http://www.aztecproducts.com/Product...r/overview.cfm

  8. #8
    Privitize it shotime's Avatar
    Join Date
    Feb 2004
    Posts
    509
    Post Thanks / Like
    Originally posted by Anthony Orosco
    I would stay away from the Mytee brand unless a Mytee dealer is located close by because if not it will cost you major money to be repaired.

    The $400 units can be very effective at cleaning even without hot water.

    Pictures are worth a thousand words so here are two.

    Anthony
    Also try and deal local or buy a locally sold brand if you can. If there ever is a problem, you aren`t tied up with the time and charges of shipping.

  9. #9
    exotiXboard Ferrarislave's Avatar
    Join Date
    Jul 2003
    Location
    Chicago,Illinois
    Posts
    1,320
    Post Thanks / Like
    Originally posted by MobileFanatics
    What do you think about this little spotter? So far it`s the only one I found with the highest lift with heat. Thanks. http://www.aztecproducts.com/Product...r/overview.cfm
    WTF that is the same thing as the Durrmaid exact same look just difference color and $200 more expensive.
    www.exotiXboard.com

  10. #10
    Keep it clean !!! Clean Dean's Avatar
    Join Date
    Dec 2002
    Location
    NJ
    Posts
    2,202
    Post Thanks / Like

    I use this one for light jobs...

    http://detailking.goemerchant7.com/i...9&ItemName=The!32Spot!32Extractor&ExpandedDepts=

    I purchased her used and I really got my moneys worth!!! Anthony is right about getting a Mytee serviced. It seems that Mytee has no distributers out there at all. Luckily my local janitorial supply store is well equipped/educated to handle all types of extractors.
    No buff to tuff

  11. #11
    bigron62's Avatar
    Join Date
    Feb 2004
    Location
    central ca
    Posts
    1,418
    Post Thanks / Like
    all i can say is you get what you pay for . i coughed up the loot for the mytee 6 gal and have no regrets . if something breaks call them and they will talk you thru it and send any parts you need . i got mine from rightlook and they have been great on anthing ive needed on the customer service . also im in ca near mytee so these guys are right it may take longer for service on east coast give them a call and see what they say . i know they have service centers all over the place
    back in buisness baby

  12. #12
    That'll buff right out! jimmybuffit's Avatar
    Join Date
    Jan 2003
    Location
    Indianapolis (NW)
    Posts
    2,384
    Post Thanks / Like
    Century 400 Sensei. Worth the money. If you do more than 1 FULL detail per eek, then you can justify the expense.

    Professional in every sense.

    Anthony is is 100% correct about the Mytee... be SURE you have a local repair source.

    Jim
    "If it was easy, everybody`d be doing it."
    www.jimmybuffit.com

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. What spotters to use with Mytee Lite II extractor?
    By cobrar97 in forum Car Detailing Product Discussion
    Replies: 5
    Last Post: 07-08-2007, 10:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •