Page 1 of 3 123 LastLast
Results 1 to 15 of 34
  1. #1
    Owner and Tech. Rep Nickc0844's Avatar
    Join Date
    Feb 2004
    Location
    Atlanta (Woodstock), Georgia
    Posts
    1,680
    Post Thanks / Like

    Poorboy`s Edge M5

    Hey guys,

    The other day I had the opportunity to tackle this 2001 M5. It has 97,000 miles on it, so there was plenty of work to do. The intention is that the guy is going to sell it in the coming weeks to buy a Ferrari 348 (ha, add another one to my list)

    The paint had mega swirls into it, as the picture will show. Keep in mind, this isn`t in full sun either; it was a mess!

    My good friends at Edge developed the new DA 2000 pad. This one in particular has a yellow mild cut on one side, and the blue polishing on the other. This was perfect for the quick change. By the way, no problems with the threading or anything, but thanks for the heads up. These new pads rock!! If you thought the original DA`s were good, your in for a shock. Well worth the $$, and over time, it`ll save you some bucks.

    The soap I used was the remaining portion of the Poorboy`s Prototype soap that I have enjoyed using. SOO many suds, a smell similar to the New and Improved QD+, and plenty of lubrication (in this case, the lubrication didn`t matter, as I was doing a full detail anyway. However, this soap in the making is very nice to use on freshly detailed vehicles). I used the Adam`s Polishes Claybar (my favorite), along with their detail spray as the lube.

    For the paint regimen, I decided to use Poorboy`s SSR 2.5. This is the second testing formula I received, and the 2nd car I have done with it. I really like it, and if I`m not mistaken, this is the production version. With the yellow side down and the PC cranked to 5.5-6, I was on my way. I then flipped the pad to the blue side and hit the car with SSR1. For the finale, the protection was Adam`s Butter Wax by hand. This thing looks smooth as anything.

    Interior got a fresh, and much needed, helping of Poorboy`s Natural Look, and the tires were lathered up with Bold n` Bright.

    The customer was very pleased with the results as he called me later that night asking to do the wife`s 325 Can`t complain about that!

    P.S. The shipping from Premium Auto Care is amazing!! Thanks Dwayne!!
    P.S.S. The car is a sweet one to drive!
    Attached Images Attached Images
    Last edited by Nickc0844; 06-18-2004 at 08:59 PM.
    Nick Carberry
    ~Detailing high-end cars with quality products~

  2. #2
    Owner and Tech. Rep Nickc0844's Avatar
    Join Date
    Feb 2004
    Location
    Atlanta (Woodstock), Georgia
    Posts
    1,680
    Post Thanks / Like
    Front quarter BEFORE:
    Attached Images Attached Images
    Nick Carberry
    ~Detailing high-end cars with quality products~

  3. #3
    Owner and Tech. Rep Nickc0844's Avatar
    Join Date
    Feb 2004
    Location
    Atlanta (Woodstock), Georgia
    Posts
    1,680
    Post Thanks / Like
    Wheels BEFORE (a mess, but hard to see):
    Attached Images Attached Images
    Nick Carberry
    ~Detailing high-end cars with quality products~

  4. #4
    Owner and Tech. Rep Nickc0844's Avatar
    Join Date
    Feb 2004
    Location
    Atlanta (Woodstock), Georgia
    Posts
    1,680
    Post Thanks / Like
    Wheels AFTER. This was accomplished by using Adam`s Polishes Aluminum Polish (is safe for all metals and clear coats):
    Attached Images Attached Images
    Nick Carberry
    ~Detailing high-end cars with quality products~

  5. #5
    Owner and Tech. Rep Nickc0844's Avatar
    Join Date
    Feb 2004
    Location
    Atlanta (Woodstock), Georgia
    Posts
    1,680
    Post Thanks / Like
    Quarter Panel AFTER:
    Attached Images Attached Images
    Nick Carberry
    ~Detailing high-end cars with quality products~

  6. #6
    Owner and Tech. Rep Nickc0844's Avatar
    Join Date
    Feb 2004
    Location
    Atlanta (Woodstock), Georgia
    Posts
    1,680
    Post Thanks / Like
    Hood AFTER:
    Attached Images Attached Images
    Nick Carberry
    ~Detailing high-end cars with quality products~

  7. #7
    Founder Poorboy's World Poorboy's Avatar
    Join Date
    Apr 2003
    Location
    Boca Raton, Fl
    Posts
    14,543
    Post Thanks / Like
    very nice work Nick ..I`m sure he`ll get top $$ for it now
    life is short ..do it while you can

    e-mail info@poorboysworld.com

  8. #8
    Woob's Avatar
    Join Date
    Feb 2004
    Location
    Raleigh, Cary, Durham, North Carolina
    Posts
    3,800
    Post Thanks / Like
    Have you used the 7.5 Advanced pads from LC? How do the Edge pads perform for a beginner? How did you clean up that front quarter? It seems so dirty and muky. Did you polish the rims with a microfiber or just terry cloth? Whats the routine you do with Natural Look?

    Sweet bimmer! Nice to see 2.5 working well and tackling all those swirls. I hope the 325 isn`t as bad. :LOLOL

    Sorry for all the questions
    Last edited by Woob; 06-18-2004 at 08:47 PM.

  9. #9
    Owner and Tech. Rep Nickc0844's Avatar
    Join Date
    Feb 2004
    Location
    Atlanta (Woodstock), Georgia
    Posts
    1,680
    Post Thanks / Like
    Some fun shots. The cop pulled up like 5 minutes after I was taking photos. He probably thought I was coming back later to boost the ride. Good thing I didn`t peel out in front of him. This clutch is sensitive!
    Attached Images Attached Images
    Nick Carberry
    ~Detailing high-end cars with quality products~

  10. #10
    Owner and Tech. Rep Nickc0844's Avatar
    Join Date
    Feb 2004
    Location
    Atlanta (Woodstock), Georgia
    Posts
    1,680
    Post Thanks / Like
    Front:
    Attached Images Attached Images
    Nick Carberry
    ~Detailing high-end cars with quality products~

  11. #11
    Owner and Tech. Rep Nickc0844's Avatar
    Join Date
    Feb 2004
    Location
    Atlanta (Woodstock), Georgia
    Posts
    1,680
    Post Thanks / Like
    What swirls:
    Attached Images Attached Images
    Nick Carberry
    ~Detailing high-end cars with quality products~

  12. #12
    Owner and Tech. Rep Nickc0844's Avatar
    Join Date
    Feb 2004
    Location
    Atlanta (Woodstock), Georgia
    Posts
    1,680
    Post Thanks / Like
    Last One:
    Attached Images Attached Images
    Nick Carberry
    ~Detailing high-end cars with quality products~

  13. #13
    Owner and Tech. Rep Nickc0844's Avatar
    Join Date
    Feb 2004
    Location
    Atlanta (Woodstock), Georgia
    Posts
    1,680
    Post Thanks / Like
    Woob--

    I haven`t used the 7.5" pads from LC. Personally, I think 7-8 is pretty big to work with. I have some 4" pads I absolutely love to play with. Great for smaller areas and motorcycles and such.

    The front quarter was just washed, clayed, and then using the PC, I used the SSRs.....nothing special

    As for performance, I think they would apply to any and all levels of detailing. I went with all 5 colors with the original pads because I legitimately had a use for them. As for the average joe, you could still find use for at least 3, if not all 4 (no black pad now).

    For the rims, I cleaned them using Power Wheel by Top of the Line. This is the best all wheel cleaner I`ve got my hands on as of yet. From there, I take a terry wrapped foam applicator to apply the Aluminum polish, then I take the bulk of the residue off with a shop towel, and finish off with a designated non-paint microfiber. For the pictures, I sprayed the rims with Megs Final Detail.

    For Natural Look and other similar dressings, I only use the gray foam applicators from Adam`s. I bought tons of these. They clean up very well afterwards. They have pictures of them on their site.

    Hope I covered the ?`s. I`d be happy answer any others you might have.
    Nick Carberry
    ~Detailing high-end cars with quality products~

  14. #14
    Woob's Avatar
    Join Date
    Feb 2004
    Location
    Raleigh, Cary, Durham, North Carolina
    Posts
    3,800
    Post Thanks / Like
    Thanks Nick! Your work makes me wanna buy more products, which isn`t good at all Does the Power Wheel from TOL foam? Or is it like a gelly liquid that clings and lets you wash easily.

    Keep posting and buying

    Cars look amazing, I bet the M5 was a blast to drive.

  15. #15
    Owner and Tech. Rep Nickc0844's Avatar
    Join Date
    Feb 2004
    Location
    Atlanta (Woodstock), Georgia
    Posts
    1,680
    Post Thanks / Like
    I bought Power Wheel Wash from Anthony`s suggestion.....by the gallon! It was very inexpensive, and what I did was use up my Meg`s Hot Rims foaming sprayer and filled it from there. I dilute it 1:1, and it goes a long way. It`s not like a typical liquid, but the foaming sprayer is a must in my opinion for wheel cleaning.

    Yes, the car was fun to drive, however, I only put it in 3rd gear through the subdivision. :naughty
    Nick Carberry
    ~Detailing high-end cars with quality products~

 

 
Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Edge Edge Edge!! Wave, wool, flat, FREE SIP or 106ff
    By elitemobile in forum Good Deals
    Replies: 10
    Last Post: 08-23-2007, 07:10 AM
  2. Do Cyclo Edge pads fit on PC edge adapter?
    By jlift in forum Paint Correction and Gloss Enhancement
    Replies: 2
    Last Post: 04-30-2007, 06:52 PM
  3. Edge Green vs Edge Orange Pads
    By pingable in forum Machine Polishing & Sanding
    Replies: 12
    Last Post: 03-20-2007, 07:08 AM
  4. Ripped Edge Pad/New 4" Edge Pads
    By tustah in forum Car Detailing Product Discussion
    Replies: 7
    Last Post: 06-25-2006, 11:11 PM
  5. Edge pad foam types (attn: Edge pad users)
    By wifehatescar in forum Detailing Product Reviews
    Replies: 9
    Last Post: 10-22-2004, 07:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •