Page 1 of 2 12 LastLast
Results 1 to 15 of 16
  1. #1

    Join Date
    Jul 2003
    Posts
    331
    Post Thanks / Like

    Pro Polish Question

    I tried pro polish for the first time today and what a ````` to remove and it left the suface with a nice streak, I had to use AIO to clean it up. The only thing that I could think of is that the pad should be damp, but the directions don`t mention that.

    Any ideas???

  2. #2
    Strange name, ain't it? NattyBumppo's Avatar
    Join Date
    Aug 2002
    Location
    NJ
    Posts
    1,301
    Post Thanks / Like
    Most likely you didn`t work the product long enough and also possibly used too much. Pro Polish will buff off extremely easy if you work it through properly. Like most polishes, try buffing it off when still wet and you`ll get streaks and it`ll take a lot longer to remove.

    On the pads, I`ve used it both with dry and dampened foam pads with PC D.A, rotary and by hand. I found no real difference but I do prefer to dampen applicators as a general rule (until the pad becomes primed with product).

    If using a machine, apply a thin bead all the way around the pad about an inch from the edge. With the machine off smear it over the finish before starting the machine to eliminate any sling. Work the product until it begins to dry or dust. Wait another minute then you`ll be able to buff it off with an easy swipe of a terry or mf towel.

    Let us know how you make out. Hope this helped!

    Natty
    Natty
    ------------------------------------------------
    "Sorry Miss, I just decided I don`t do mini-vans"

  3. #3
    Adopt a shelter pet! JimS's Avatar
    Join Date
    Jan 2003
    Location
    Galeburg, Il
    Posts
    1,151
    Post Thanks / Like
    I"ve had no problem with the Pro Polish. I suspect that Natty is right.

    Hey Natty.....check your pm`s.
    Dream big and be willing to do the work to get there.

  4. #4

    Join Date
    Jul 2003
    Posts
    331
    Post Thanks / Like
    So I should wait for the polish to dry?

  5. #5
    Strange name, ain't it? NattyBumppo's Avatar
    Join Date
    Aug 2002
    Location
    NJ
    Posts
    1,301
    Post Thanks / Like
    Originally posted by ernman
    So I should wait for the polish to dry?
    You should work the product fully till almost dry or the first signs of dusting or until it starts to simply disappear. You`ll know when you`ve reached any of the above points. If you stop working the product prematurely then you would wait until it is dry to touch and you can remove it just be running your finger through it.

    That is why I said after you`ve worked it fully, wait another minute then buff off. THis way just in case it is still in the workable stage it`ll have a minute to dry more before you attempt to buff it off.

    Natty
    Natty
    ------------------------------------------------
    "Sorry Miss, I just decided I don`t do mini-vans"

  6. #6
    Recovering Postaholic rhillstr's Avatar
    Join Date
    Jun 2003
    Location
    Columbus, OH
    Posts
    386
    Post Thanks / Like
    You don`t have to wait, in fact it`s better if you don`t!

    :jump
    Ask a question, be a fool for a minute. Don`t ask a question, be a fool forever.
    -Chinese Proverb

  7. #7
    Boss_429
    Guest
    Originally posted by rhillstr
    You don`t have to wait, in fact it`s better if you don`t!

    :jump
    And why is it better if you don`t?

  8. #8
    Car Detailing Whore
    Join Date
    Apr 2003
    Location
    Moore, OK
    Posts
    1,319
    Post Thanks / Like
    Pro Polish is super spiffidy neato! I love that stuff, does a great job of minor swirl removing.

    I agree with Natty here, let it set for about a minute, and your good to go.
    http://tassadar.ezekial.net

  9. #9

    Join Date
    Jul 2003
    Posts
    331
    Post Thanks / Like
    That`s the wierd thing I only did a section at a time, rubbed on, tried to wipe off, but it streaked. I tried to use it like I use AIO.

    I guess pro polish isn`t for me, anybody want to trade for VM Glaze.

  10. #10
    Car Detailing Whore
    Join Date
    Apr 2003
    Location
    Moore, OK
    Posts
    1,319
    Post Thanks / Like
    You didnt wait long enough. Just go back to a panel and make sure to give it some time to set, its a good product.
    http://tassadar.ezekial.net

  11. #11
    Strange name, ain't it? NattyBumppo's Avatar
    Join Date
    Aug 2002
    Location
    NJ
    Posts
    1,301
    Post Thanks / Like
    Originally posted by ernman
    That`s the wierd thing I only did a section at a time, rubbed on, tried to wipe off, but it streaked. I tried to use it like I use AIO.

    I guess pro polish isn`t for me, anybody want to trade for VM Glaze.
    Well you`ve just uncovered your own problem.... Pro Polish is NOT Klasse AIO.

    Give it a try the way I described. I`m sure your experience will be very different.

    Natty
    Natty
    ------------------------------------------------
    "Sorry Miss, I just decided I don`t do mini-vans"

  12. #12
    I'm just a man.
    Join Date
    Feb 2003
    Location
    Madison, Wi
    Posts
    569
    Post Thanks / Like
    In deed. It isn`t an AIO product. It`s a polish. If you ask me it`s more of a cleaner but let`s not get picky. A polish needs to worked into the paint to do anything. It`s like smearing compound on your car with a towel and then just whiping it off. Please for your own sake give it a try.
    The Koop Is BIZZZAAAK

  13. #13
    What's that smell? ACE's Avatar
    Join Date
    Apr 2003
    Posts
    321
    Post Thanks / Like
    One thing i`ve found about all of PB`s products is that they are extremely easy to remove and they are very non-critical of humidity and such. You do have to work the Pro Polish in, but not overly so. Are you using microfiber? I get major streaking with many products if I don`t use MF towels. Also, you have to apply it thin, as you do with any product. Try another application if you dare - maybe you just had some products on the finish that reacted with the PP. A second application will leave the surface totally clean.

  14. #14
    Boss_429
    Guest
    :yeah

  15. #15
    Recovering Postaholic rhillstr's Avatar
    Join Date
    Jun 2003
    Location
    Columbus, OH
    Posts
    386
    Post Thanks / Like
    Sorry I didn`t get back to you Natty- I was thinking polish w/carnuba too. Sorry about the confusion. He really needs to give one of them a new name!!!!

    :doh
    Ask a question, be a fool for a minute. Don`t ask a question, be a fool forever.
    -Chinese Proverb

 

 
Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. HD Polish, Rupes Keramik, Optimum Hyper Spray Polish Question
    By pwaug in forum Car Detailing Product Discussion
    Replies: 2
    Last Post: 03-03-2014, 02:01 PM
  2. wax vs polish question
    By jswift2000 in forum Car Detailing
    Replies: 6
    Last Post: 01-04-2008, 03:53 PM
  3. New here - With a polish question
    By lllElementlll in forum Car Detailing Product Discussion
    Replies: 3
    Last Post: 04-20-2007, 07:17 AM
  4. polish question
    By newguy in forum Car Detailing
    Replies: 4
    Last Post: 03-22-2005, 03:53 AM
  5. Polish/wax question
    By Webb in forum Car Detailing
    Replies: 0
    Last Post: 04-04-2004, 06:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •