Does anyone apply AIO with a pc?

[keeotee]

And if so, do you mist the pad first? What speed setting and how long do you work it? Do you use the polishing pad?

[WarrenA]

this is what I do when I first get the pad on the pc I give it 1 shot with the"quick detailer" like Mist-n-shine. then use the pad as usual. I usually start at 2,000 opm or the low setting to apply and goose it up a little when I remove the finish, or when I hit a bad spot in the paint and want a little more shine.

[andriver]

I usually apply with a white pad at 4 speed. I do not mist the pad. I work the product until it hazes.

[groebuck]

I do, with the Meg`s polishing pad - work 3`x2` section I do two passes then wipe it off immediatley - I really only use the PC to speed the application..AIO is hard to remove if you let if haze or dry..

[probegt]

I also mist my pad with a shot of water and work it the product till it is almost gone. I apply it at 3 speed till I get it around the area im working on then go to 4.5 and work it throughly.

[Koop]

probegt.... are you on probetalk forums too? I`m koop there as well.

[probegt]

yep.

[Koop]

welcome to our little hole in the web. you`ll have to pm and tell me about your ride.